Vol 9 No 1 (2024): June
Food Science

Flow injection system design for the determination of brown bismarck dye
Desain sistem injeksi aliran untuk penentuan pewarna bismarck coklat


*
Noor Razaq Abbas Raheem
College of Science, Department of chemistry, Iraq
Noor Al-Huda Ali Kazem Mohammed
College of Science, Department of chemistry, Iraq

(*) Corresponding Author
Picture in here are illustration from public domain image or provided by the author, as part of their works
Published May 13, 2024
Keywords
  • flow injection system,
  • Bismarck brown dye,
  • low-cost, optimization,
  • dye concentration measurement
How to Cite
Mohammed, S. H. M., Raheem, N. R. A., & Mohammed, N. A.-H. A. K. (2024). Flow injection system design for the determination of brown bismarck dye. Academia Open, 9(1), 10.21070/acopen.9.2024.8938. https://doi.org/10.21070/acopen.9.2024.8938

Abstract

This study presents a low-cost flow injection system for estimating Bismarck brown dye, addressing the need for economical and efficient dye concentration measurement methods. The system's design and optimization process are detailed, focusing on parameters like carrier solution speed, dye model size, frequency, and dilution coefficient. Results show optimal conditions for accurate estimations, with the system outperforming traditional color methods in terms of sensitivity and measurement range. This novel approach offers a practical solution for various analytical applications requiring precise dye concentration assessments, with implications for cost-effective chemical analysis in diverse fields.

 

Highlight: 

  1. Low-cost flow system for Bismarck brown dye.
  2. Optimized for accuracy in dye concentration measurement.
  3. Practical and efficient for various analytical applications.

 

Keyword:  flow injection system, Bismarck brown dye, low-cost, optimization, dye concentration measurement

Downloads

Download data is not yet available.

References

  1. J. Ruzicka and E. H. Hanssen, "Anal. Chim. Acta," vol. 78, pp. 145, 1975.
  2. D. K. Kobylinska, M. C. Bruzzoniti, C. Sarzanini, and M. Franko, "Journal of Physics Conference Series," vol. 214, pp. 12-19, 2010.
  3. M. Hulsman, M. Bose, and W. E. Van der Linden, "Analytica Chem Acta," vol. 324, pp. 13, 1996.
  4. M. Trojanowiez, "Advances in Flow Analysis," Wiley-VCH Publishing House GmbH & Co. KGaA, 2nd ed., 2002.
  5. D. Barceló, "Comprehensive Analytical Chemistry. Advances in Flow Injection Analysis and Related Techniques," edited by S. D. Kolev, 1st ed., Elsevier, Australia, 2008.
  6. F. M. Calatyud, "Flow Injection Analysis of Pharmaceuticals," Valenciaspain, 1st ed., 2003.
  7. J. M. Calatyud, "Flow Injection Analysis of Pharmaceuticals," University of Valencia, Spain, Taylor and Francis, 2003.
  8. T. Dallas and P. K. Dasgupta, "TrAC," vol. 23, pp. 385, 2004.
  9. A. S. Farhood, "M.Sc. Thesis," Babylon University, 2011.
  10. L. Skeggs, "Am. J. Clin. Pathol," vol. 13, pp. 451, 1957.
  11. M. A. Segundo and A. O. S. Rangel, "J. Flow Injection Analysis," vol. 19, pp. 1, 2002.
  12. Z. Li, D. Li, K. Oshita, and M. Shoji, "Talanta," vol. 82, pp. 1225-1229, 2010.
  13. J. Ruzicka and E. H. Hansen, "Flow Injection Analysis," 2nd ed., Wiley, New York, 1988.
  14. A. Sanz-Medel, "Flow Analysis with Atomic Spectrometric Detectors," Elsevier, vol. 9, University of Oviedo, Spain, 1990.
  15. S. P. Bhutani, "Organic Chemistry," Gopaljee Enterprises, Delhi, India, 2007.
  16. S. Cakir, E. Bicerb, M. Odabaşoglub, and C. Albayrakb, "J. Braz. Chem. Soc.," vol. 16, pp. 711, 2005.
  17. F. M. Mohareb and S. M. Sheriff, "Amer. Dyestuff Rep.," vol. 81, pp. 43, 1992.
  18. K. Yoshimura, Y. Toshimitsu, and S. Ohashi, "Talanta," vol. 27, pp. 693, 1980.
  19. T. P. Nevell, W. S. Hickman, J. Shore, F. R. Latham, and C. Senior, "Cellulosics Dyeing," Society of Dyers and Colourists, Oxford, 1995.
  20. K. Perumal, R. Baby Malleswari, A. Catherine, and T. A. Sambanda Moorthy, "J. Microbiol. Biotech. Res.," vol. 2, no. 3, pp. 475-480, 2012.
  21. S. Keshari Bhoi, "Bachelor of Technology (Chemical Engineering) Thesis," Rourkela University, India, 2010.
  22. L. Wang, J. Li, Y. Wang, L. Zhao, and Q. Jiang, "Chemical Engineering Journal," 2011.
  23. D. Barceló, "Comprehensive Analytical Chemistry. Advances in Flow Injection Analysis and Related Techniques," edited by S. D. Kolev, 1st ed., Elsevier, Australia, 2008.
  24. O. Osborne, A. Pring, and C. Lenehana, "Talanta," vol. 82, pp. 1809-1813.
  25. M. Nakajima, M. Ohno, K. Chikama, T. Sekia, and K. Oguma, "Talanta," vol. 79, pp. 1050-1054, 2009.